LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 317 (5.7L Engine (Service Information)) >> Engine Block >> ROD, Piston and Connecting >> Cleaning >> Cleaning

ROD, Piston and Connecting: Cleaning: Cleaning

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not use a wire wheel or other abrasive cleaning devise to clean the pistons or connecting rods. The pistons have a Moly coating, this coating must not be damaged.
  1. Using a suitable cleaning solvent, clean the pistons in warm water and towel dry.
  2. Use a wood or plastic scraper to clean the ring land grooves.
    CAUTION: Do not remove the piston pin from the piston and connecting rod assembly.
scientia non olet · About LEMON Manuals