LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 315 (Fuel System) >> Fuel Injection, Gas >> Throttle Body >> Removal >> 3.5L

Throttle Body: Removal: 3.5L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inlet Hose
GC0080442Courtesy of CHRYSLER LLC
  1. Disconnect negative cable from battery
  2. Remove the inlet hose from throttle body.
    Fig 2: Throttle Body Bracket
    GC0080445Courtesy of CHRYSLER LLC
  3. Disconnect electrical connectors.
  4. Disconnect vacuum hose.
  5. Remove the throttle body support bracket.
  6. Remove throttle body bolts.
    Fig 3: Throttle Gasket
    GC0080444Courtesy of CHRYSLER LLC
  7. Clean mating surfaces.
scientia non olet · About LEMON Manuals