LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 315 (Fuel System) >> Fuel Injection, Gas >> Throttle Body >> Removal >> 2.7L

Throttle Body: Removal: 2.7L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inlet Hose
GC0080442Courtesy of CHRYSLER LLC
  1. Disconnect negative cable from battery
  2. Disconnect inlet hose from throttle body.
    Fig 2: Throttle Body
    GC0080443Courtesy of CHRYSLER LLC
  3. Disconnect electrical connector.
  4. Remove throttle body bolts.
  5. Remove throttle body.
    Fig 3: Throttle Gasket
    GC0080444Courtesy of CHRYSLER LLC
  6. Clean mating surfaces.