SENSOR, Manifold Air Pressure (MAP): Removal: 2.7L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Manifold Air Pressure (MAP) Sensor

Courtesy of CHRYSLER LLC

Sensor location.
Unlock the electrical connector.

Fig 2: MAP Sensor Electrical Connector
Courtesy of CHRYSLER LLC
Remove electrical connector.

Fig 3: 1/4 Turn To Remove/Install
Courtesy of CHRYSLER LLC
Turn sensor 1/4 turn counterclockwise.
Pull sensor straight up.

Fig 4: MAP Sensor O-Ring Seal & MAP Sensor Mounting Hole
Courtesy of CHRYSLER LLC
Remove sensor.
Inspect o-ring.