LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 315 (Fuel System) >> Fuel Injection, Gas >> SENSOR, Crankshaft Position >> Removal >> 2.7L

SENSOR, Crankshaft Position: Removal: 2.7L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Sensor Location
GC0080454Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Raise vehicle and support.
    Fig 2: Crankshaft Position (CKP) Sensor
    GC0080455Courtesy of CHRYSLER LLC
  3. Unlock and disconnect the electrical connector.
  4. Remove mounting bolt.
  5. Remove sensor.
scientia non olet · About LEMON Manuals