LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 315 (Fuel System) >> Fuel Injection, Gas >> SENSOR, Air Temperature, Inlet >> Removal >> 3.5L

SENSOR, Air Temperature, Inlet: Removal: 3.5L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Inlet Air Temperature Sensor - 3.5L
GC0080459Courtesy of CHRYSLER LLC
  1. Sensor location.
  2. Unlock the electrical connector.
  3. Remove electrical connector from sensor.
    Fig 2: Sensor Orientation
    GC0080460Courtesy of CHRYSLER LLC
  4. Note sensor orientation.
  5. Remove sensor.
scientia non olet · About LEMON Manuals