LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 315 (Fuel System) >> Fuel Injection, Gas >> SENSOR, Air Temperature, Inlet >> Removal >> 2.7L

SENSOR, Air Temperature, Inlet: Removal: 2.7L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Sensor Location 2.7L
GC0080456Courtesy of CHRYSLER LLC
  1. Sensor location.
  2. Disconnect negative battery cable.
    Fig 2: Connector Unlocked
    GC0080457Courtesy of CHRYSLER LLC
  3. Unlock electrical connector.
  4. Remove electrical connector from sensor.
  5. Note the orientation of the sensor.
    Fig 3: Sensor Removed From Air Inlet Hose
    GC0080458Courtesy of CHRYSLER LLC
  6. Remove sensor from air inlet hose.
scientia non olet · About LEMON Manuals