INJECTOR(S), Fuel: Removal: 5.7L/6.1L
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The fuel system is under constant pressure even with engine off. Before servicing fuel injector(s), fuel system pressure must be released.
To remove one or more fuel injectors, the fuel rail assembly must be removed from engine.
- Perform Fuel System Pressure Release Procedure.
- Remove fuel injector rail. See Fuel System/Fuel Delivery/RAIL, Fuel - Removal .
- Remove clip(s) (3) retaining injector(s) (4) to fuel rail.
- Remove injector(s) from fuel rail.