LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 315 (Fuel System) >> Fuel Delivery, Diesel >> SOLENOID, Fuel Pressure >> Removal >> Removal

SOLENOID, Fuel Pressure: Removal: Removal

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: No sparks, open flames or smoking. Risk of poisoning from inhaling and swallowing fuel. Pour fuel only into appropriately marked OSHA approved containers. Wear protective clothing. Risk of injury to eyes and skin from contact with fuel.
NOTE: The fuel pressure solenoid is serviced with the left fuel rail only.
  1. Disconnect negative battery cable.
  2. Remove engine cover.
  3. Remove the left fuel rail. See Fuel System/Fuel Delivery/RAIL, Fuel - Removal .