LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 310 (Cruise Control System (Service Information)) >> MODULE, Adaptive Cruise Control >> Standard Procedure >> Adaptive Cruise Control (Acc) Alignment >> Vehicle Preparation For Adaptive Cruise Control Alignment >> Notes

Vehicle Preparation For Adaptive Cruise Control Alignment: Notes

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect vehicle for any damage that could affect ACC function or alignment, damaged suspension, wheel alignment, damaged fascia, broken grill.
  2. Verify proper tire inflation pressures.
  3. Verify that the vehicle is sitting level.
  4. Be certain that the ACC lens is clean and free from obstructions.
  5. Remove any accumulations of mud, snow or ice from the vehicle underbody.
  6. Verify that there is no load in the vehicle (cargo or passengers).
  7. Repair or replace any ineffective, worn or damaged suspension components that will hinder proper adaptive cruise control alignment.
  8. Be certain that the assembly mounting screw are tightened to 9 N.m (79.5 in. lbs.).
  9. The fuel tank should be FULL. Add 2.94 kilograms (6.5 pounds) of weight over the fuel tank for each estimated gallon of missing fuel.
  10. Verify that the vehicle has at least 16 kilometers (10 miles) showing on the odometer.
  11. Close and latch hood.
scientia non olet · About LEMON Manuals