LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Lighting Systems - Exterior (Service Information)) >> UNDERHOOD Lamp Unit - Police >> Removal

UNDERHOOD Lamp Unit - Police: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: UNDERHOOD LAMP UNIT LOCATION - TYPICAL - POLICE
GC0040749Courtesy of DAIMLERCHRYSLER CORP.
  1. Open hood, disconnect and isolate the battery negative remote terminal or pull fuse in the PDC.
  2. Disconnect the wire harness connector (1) from lamp unit (2).
  3. Remove the push-pin fastener attaching underhood lamp unit (2) to inner hood panel.
  4. Remove the underhood lamp unit (2) from the vehicle.
scientia non olet · About LEMON Manuals