UNDERHOOD Lamp - Police: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: UNDERHOOD LAMP LENS

Courtesy of DAIMLERCHRYSLER CORP.

Open hood, disconnect and isolate the battery negative remote terminal or pull fuse in the PDC.
Insert a small flat blade in access slot between the lamp base (1) and lamp lens (2).
Lift the lamp lens (2) upward and remove the lamp lens (2).

Fig 2: UNDERHOOD LAMP
Courtesy of DAIMLERCHRYSLER CORP.
Depress bulb terminal (2) inward to release bulb (1).