LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Lighting Systems - Exterior (Service Information)) >> Repeater Lamp - Export >> Installation

Repeater Lamp - Export: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Repeater Lamp
GC0016142Courtesy of DAIMLERCHRYSLER CORP.
  1. Replace Bulb.
  2. Engage right hook of lamp (3) into the sheet metal (2 - note correct orientation of lettering on lens).
  3. Rotate lamp in place until left side engages (light audible click).