License Plate Lamp Unit: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lamp Socket

GC0016137

Courtesy of DAIMLERCHRYSLER CORP.

Position lamp socket into lamp unit.

Fig 2: License Plate Lamp Unit
Courtesy of DAIMLERCHRYSLER CORP.
Twist the socket clockwise until stops.

Fig 3: Mounting Screws
Courtesy of DAIMLERCHRYSLER CORP.
Maneuver the lamp unit up into rear fascia and install the two retaining screws (1).