LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Lighting Systems - Exterior (Service Information)) >> Headlamp Leveling Module - Export >> Installation

Headlamp Leveling Module - Export: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: When replacing the headlamp leveling module/HID translator module, the system must be calibrated using a Scan Tool.
Fig 1: Removing/Installing Module
GC0016112Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the one nut (2) holding the module (1) to the bracket.
  2. Connect the one electrical connector to the HID translator module.
  3. Connect the battery negative cable.
  4. Using a Scan Tool, calibrate the headlamp levelling system.
scientia non olet · About LEMON Manuals