Headlamp Level Sensor - Export: Removal: Rear
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
- Disconnect and isolate the battery negative cable.
- Hoist vehicle.
- Unsnap the sensor link from the spring link (rear) (3).
- Disconnect the electrical connector (2).
- Remove the two fasteners to the sensor and bracket (1).