Headlamp Level Sensor - Export: Description

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Headlamp Leveling Sensor System

Courtesy of DAIMLERCHRYSLER CORP.

The headlamp leveling system uses two headlamp level sensors to determine when the vehicle has had its ride height or angle changes, due to passenger/cargo additions and road conditions.

Fig 2: Headlamp Leveling Sensor

Courtesy of DAIMLERCHRYSLER CORP.

There is one sensor (1) mounted on the spring link (3) on the right side of the rear suspension.

Fig 3: Headlamp Leveling Sensor

Courtesy of DAIMLERCHRYSLER CORP.

There is a second sensor (2) mounted on the upper control arm (1) on the right side, in the front of the vehicle.

Each sensor has a link that is connected to the suspension and to the sensor, one electrical connector that connects the sensor to the vehicles electrical system wiring harness, and one bracket that mounts with one nut to the vehicle.