LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Lighting Systems - Exterior (Service Information)) >> Fog Lamp Unit >> Installation

Fog Lamp Unit: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fog Lamp Units
GC0016094Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the fog lamp unit (1) in fascia opening.
  2. Install the two fog lamp unit mounting fasteners.
  3. Connect the harness connector.
    Fig 2: Headlamp Attaching Screws
    GC0013429Courtesy of DAIMLERCHRYSLER CORP.
  4. Install the headlamp unit (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT - INSTALLATION) .
    Fig 3: Upper Radiator Closeout Panel
    GC0013451Courtesy of DAIMLERCHRYSLER CORP.
  5. Install the six upper fascia retaining fasteners (Refer to FRAME & BUMPERS/BUMPERS/FRONT FASCIA - INSTALLATION) .
  6. Install the upper radiator closeout panel (2 and 4).
  7. Connect the battery negative cable.
scientia non olet · About LEMON Manuals