LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Lighting Systems - Exterior (Service Information)) >> Auto Headlamp Sensor >> Installation

Auto Headlamp Sensor: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Auto Headlamp Sensor
GC0016090Courtesy of DAIMLERCHRYSLER CORP.
  1. Connect the one electrical connector.
  2. Position the auto headlamp sensor (1) in instrument panel and press firmly down to snap into place.
    Fig 2: Defroster Grille
    GC0013484Courtesy of DAIMLERCHRYSLER CORP.
  3. Install the defroster grille (Refer to BODY/INSTRUMENT PANEL/DEFROSTER GRILLE - INSTALLATION) .
  4. Connect the battery negative cable.