3.0L Diesel

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Belly Pans

Courtesy of CHRYSLER LLC

Disconnect negative battery cable.
Raise vehicle and support.

Fig 2: Removing/Installing Belly Pan
Courtesy of CHRYSLER LLC
Remove the rear belly pan.
Remove the middle belly pan.

Fig 3: Starter Installed
Courtesy of CHRYSLER LLC
Disconnect the battery connection.

Fig 4: Solenoid Electrical Connections
Courtesy of CHRYSLER LLC
Disconnect the solenoid connection.

Fig 5: Mounting Bolts
Courtesy of CHRYSLER LLC
Remove the 2 mounting bolts.

Fig 6: Starter Loose
Courtesy of CHRYSLER LLC
Remove starter from vehicle.