LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Steering System) >> Gear >> TIE ROD, Steering >> Diagnosis and Testing >> Tie Rod >> Inner Tie Rod

Inner Tie Rod

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Always check and repair (if necessary) outer tie rod free-play before checking inner tie rod free-play. False results can otherwise be obtained.
Fig 1: Checking Inner Tie Rod Free-Play
GC0080540Courtesy of CHRYSLER LLC
  1. Grasp the inner tie rod near the steering gear bellows and attempt to move the tie rod straight up and down. If any free-play is felt, replace the inner tie rod. See Steering/Gear/TIE ROD, Steering - Removal .
  2. If no free-play is felt, install the front wheels. Refer to Tires and Wheels - Installation .
  3. Remove support and lower the vehicle.
scientia non olet · About LEMON Manuals