LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (Frame & Bumpers) >> Frame >> Standard Procedure >> Standard Procedure - Rear Frame Rail Replacement >> Additional Information

Additional Information

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Observe all cautions and warnings per the Chrysler service information. See Frame and Bumpers/Frame - Warning 

Reference the Chrysler weld process chart. See Frame and Bumpers/Frame - Specifications 

Butt joint should be metal finished without thinning the base rail material or weldment. This is a cosmetic finishing process to disguise the repair and should have the surface coating (paint) duplicated as well.

Restore corrosion protection when complete with all welding operations.

scientia non olet · About LEMON Manuals