LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 297 (Lighting Systems - Exterior (Service Information)) >> SENSOR, Headlamp Leveling, Export >> Removal >> Removal >> Rear

SENSOR, Headlamp Leveling, Export: Removal: Removal: Rear

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Headlamp Leveling Sensor
GC0079757Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
  2. Hoist vehicle.
  3. Unsnap the sensor link from the spring link (rear) (3).
  4. Disconnect the electrical connector (2).
  5. Remove the two fasteners to the sensor and bracket (1).
scientia non olet · About LEMON Manuals