LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 295 (Emissions Control System) >> Exhaust Gas Recirculation >> TUBE, Exhaust Gas Recirculation (EGR) >> Installation >> 2.7L - Lower Tube

2.7L - Lower Tube

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: EGR Valve & Upper/Lower Tube
GC0096074Courtesy of CHRYSLER LLC
  1. Clean mounting surface.
    Fig 2: EGR Valve Mounting Bolts, EGR Valve & EGR Tube
    GC0081108Courtesy of CHRYSLER LLC
  2. Install the lower tube to vehicle.
  3. Install the lower tube bolts to EGR valve (3).
  4. Install the lower tube bolts to exhaust manifold.
  5. Tighten the lower tube to EGR valve bolts (3) to 15 N.m (11 ft. lbs.) torque.
  6. Tighten the lower tube to exhaust manifold bolts to 31 N.m (23 ft. lbs.) torque.
    Fig 3: Relocating Purge Solenoid
    GC0081107Courtesy of CHRYSLER LLC
  7. Connect the electrical connector to EGR valve and lock.
  8. Relocate the purge solenoid.
    Fig 4: Purge Solenoid
    GC0081106Courtesy of CHRYSLER LLC
  9. Install purge solenoid to bracket.
  10. Connect negative battery cable.
scientia non olet · About LEMON Manuals