VALVE, Positive Crankcase Ventilation (PCV), Diesel: Installation: 3.0L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Oil Separator Housing & Oil Separator Housing Adaptor

Courtesy of CHRYSLER LLC

1 - OIL SEPARATOR HOUSING

2 - OIL SEPARATOR HOUSING ADAPTOR

NOTE: Inspect the oil drain back access hole in the cylinder head cover to assure that it is free of obstruction.

Lubricate the Positive Crankcase Ventilation (PCV) o-rings with clean engine oil.
Carefully position and push down on the PCV to seat.
Install the PCV retaining fasteners. Tighten fasteners to 10.8 N.m (96 in. lbs.).
Install vent hose.
Install air cleaner assembly.
Connect the negative battery.
Install engine trim cover.