LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 292 (Power Door Lock System (Service Information)) >> TRANSMITTER, Integrated Key FOB >> Standard Procedure >> FOBIK Transmitter Battery Replacement >> FOBIK With Battery Cover

FOBIK With Battery Cover

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: FOBIK With Battery Cover
GC0087708Courtesy of CHRYSLER LLC
NOTE: Do not disturb the metal terminal near the battery. Avoid touching the new battery. Skin oils may cause battery deterioration. If battery are touched, clean with rubbing alcohol.

To replace the FOBIK transmitter battery:

  1. Using a small flat bladed tool, carefully remove the battery cover on the back of the FOBIK.
    Fig 2: FOBIK With Battery Cover Removed
    GC0087709Courtesy of CHRYSLER LLC
  2. Remove the battery one at a time by slightly lifting up and sliding out from the FOBIK.
  3. Replace the battery with the same type of battery cell.
  4. Install the battery with the positive terminal up.
  5. Install battery cover and snap into place.
  6. Test FOBIK operation.