Sensor-Manifold Absolute Pressure: Removal: 6.1L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Map Sensor Location - 6.1L

Courtesy of DAIMLERCHRYSLER CORP.

The Manifold Absolute Pressure (MAP) sensor (2) is located at the rear of the intake manifold (1).

Fig 2: Map Sensor Mounting - 6.1L

Courtesy of DAIMLERCHRYSLER CORP.

Disconnect electrical connector at sensor.
Remove two sensor mounting bolts (3).
Check condition of sensor o-ring (2).