LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Fuel System) >> Fuel Injection - Except Diesel >> Sensor-Manifold Absolute Pressure >> Installation >> 2.7L

Sensor-Manifold Absolute Pressure: Installation: 2.7L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: MAP Sensor Side View
GC0013137Courtesy of DAIMLERCHRYSLER CORP.
  1. Clean MAP sensor mounting hole at intake manifold.
  2. Check MAP sensor o-ring seal for cuts or tears.
    Fig 2: MAP Sensor In Place
    GC0013139Courtesy of DAIMLERCHRYSLER CORP.
  3. Position sensor into intake manifold.
    Fig 3: Turning Sensor 1/4 Turn
    GC0013138Courtesy of DAIMLERCHRYSLER CORP.
  4. Rotate sensor 1/4 turn clockwise for installation.
    Fig 4: Sensor Location 2.7L
    GC0013140Courtesy of DAIMLERCHRYSLER CORP.
  5. Connect electrical connector to sensor.
  6. Lock electrical connector.
  7. Connect negative battery cable.
scientia non olet · About LEMON Manuals