LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Fuel System) >> Fuel Injection - Except Diesel >> Sensor-Inlet Air Temperature >> Removal >> 3.5L

Sensor-Inlet Air Temperature: Removal: 3.5L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inlet Air Temperature Sensor Location
GC0013127Courtesy of DAIMLERCHRYSLER CORP.
  1. Sensor location.
  2. Disconnect negative battery cable.
    Fig 2: Connector Unlocked
    GC0013124Courtesy of DAIMLERCHRYSLER CORP.
  3. Unlock the electrical connector.
  4. Remove electrical connector from sensor.
    Fig 3: Sensor Orientation
    GC0013128Courtesy of DAIMLERCHRYSLER CORP.
  5. Note sensor orientation.
  6. Remove sensor.
scientia non olet · About LEMON Manuals