Sensor-Crankshaft Position: Removal: 3.5L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sensor Location 2.7L/3.5L

Courtesy of DAIMLERCHRYSLER CORP.

Disconnect negative battery cable.
Raise vehicle and support.

Fig 2: Locating Crankshaft Position Sensor
Courtesy of DAIMLERCHRYSLER CORP.
Unlock and disconnect the electrical connector.
Remove mounting bolt.
Remove sensor.