LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Fuel System) >> Fuel Injection - Except Diesel >> Sensor-Crankshaft Position >> Removal >> 2.7L

Sensor-Crankshaft Position: Removal: 2.7L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Sensor Location 2.7L/3.5L
GC0013118Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect negative battery cable.
  2. Raise vehicle and support.
    Fig 2: Locating Crankshaft Position Sensor
    GC0012853Courtesy of DAIMLERCHRYSLER CORP.
  3. Unlock and disconnect the electrical connector.
  4. Remove mounting bolt.
  5. Remove sensor.
scientia non olet · About LEMON Manuals