Fuel Injection - Except Diesel: Injector-Fuel: Installation: 5.7L/6.1L
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Apply a small amount of engine oil to each fuel injector o-ring. This will help in fuel rail installation.
- Install injector(s) (4) and injector clip(s) (3) to fuel rail.
- Install fuel rail assembly (Refer to FUEL SYSTEM/FUEL DELIVERY/FUEL RAIL - INSTALLATION) .
- Start engine and check for leaks.