LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Fuel System) >> Fuel Injection - Except Diesel >> Actuator-Manifold Tune Valve >> Removal >> 3.5L

Actuator-Manifold Tune Valve: Removal: 3.5L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Manifold Tuning Valve
GC0013134Courtesy of DAIMLERCHRYSLER CORP.
1 - Manifold Tuning Valve
2 - Short Runner Valve
  1. Manifold Tuning Valve location.
    Fig 2: Remove Manifold Tuning Valve
    GC0013135Courtesy of DAIMLERCHRYSLER CORP.
  2. Disconnect negative battery cable.
    Fig 3: Remove/Install Electrical Connector
    GC0013136Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the electrical connector.
  4. Remove the 2 mounting bolts.
    Fig 4: Remove/Install Manifold Tune Valve 3.5
    GC0013133Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the Manifold Tuning Valve.