LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Fuel System) >> Fuel Injection - Except Diesel >> Actuator-Manifold Tune Valve >> Installation >> 3.5L

Actuator-Manifold Tune Valve: Installation: 3.5L

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Remove/Install Manifold Tune Valve 3.5
GC0013133Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the Manifold Tuning Valve.
  2. Install the 2 mounting bolts.
  3. Tighten bolts to 2.8 N.m (25 in. lbs.).
    Fig 2: Remove/Install Electrical Connector
    GC0013136Courtesy of DAIMLERCHRYSLER CORP.
  4. Connect the electrical connector.
  5. Connect negative battery cable.
scientia non olet · About LEMON Manuals