Solenoid - Fuel Quantity: Removal
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - LOW PRESSURE FUEL SUPPLY |
| 2 - RETURN FUEL |
| 3 - HIGH PRESSURE SUPPLY TO FUEL RAIL |
| 4 - FUEL TEMPERATURE SENSOR |
| 5 - FUEL QUANTITY SOLENOID |
| 6 - HIGH PRESSURE FUEL PUMP |
- Disconnect the negative battery cable.
- Disconnect the fuel quantity solenoid wiring harness connector.
- Remove the solenoid fasteners and remove the solenoid. See Fig 1.