LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Fuel System) >> Fuel Injection - Diesel >> Sensor-Mass Air Flow (MAF) >> Removal

Sensor-Mass Air Flow (MAF): Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Detach the air hose at the Mass Air Flow (MAF) sensor
  3. Unplug the MAF wiring harness connector.
  4. Remove the screws retaining the MAF sensor to the air cleaner housing, and remove MAF sensor.
scientia non olet · About LEMON Manuals