Fuel Delivery - Except Diesel: Rail-Fuel: Installation: 3.5L
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Lightly lubricate the fuel injector O-rings with a couple drops of clean engine oil.
- Install retaining clips on fuel injectors.
- Push injectors into fuel injector rail until clips are in the correct position.
- Position fuel rail over cylinder heads, and push rail into place. Tighten fuel rail mounting bolts to 28 N.m (250 in. lbs.) torque.
- Connect the fuel supply tube quick connect fitting to the fuel rail, (Refer to FUEL SYSTEM/FUEL DELIVERY/QUICK CONNECT FITTING - STANDARD PROCEDURE) .
- Connect the electrical connectors to the fuel injectors.
- Install intake manifold plenum, (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - INSTALLATION) .
- Connect negative cable to battery.
- Use the scan tool to pressurize the fuel system. Check for leaks.