LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Transmission >> TUBES AND HOSES, Transmission Oil Cooler >> Removal >> Removal

TUBES AND HOSES, Transmission Oil Cooler: Removal: Removal

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove upper radiator closure panels
  2. Using Release Tool 8875A, remove transmission cooler lines from transmission cooler. See Cooling - Standard Procedure .
  3. Raise vehicle on hoist.
  4. Remove front transmission cooler lines from the thermal bypass valve block.
  5. Remove rear transmission cooler lines from the thermal bypass valve block
  6. Remove the transmission cooler lines from the transmission.
scientia non olet · About LEMON Manuals