LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Specifications >> Torque

Section 287 (Engine Cooling System & Automatic Transmission Cooling System): Specifications: Torque

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE

DESCRIPTION N.m Ft. Lbs. In. Lbs.
Automatic Belt Tensioner to Block - Bolts 54 40 -
3.0L Diesel - - -
Block Heater - Bolt 2 - 17
Generator/Compressor Mounting Bracket - Bolts - - - -
No. 1 and No. 2 54 40 -
No. 3 40 30 -
Fan Shroud Mounting - Bolts 6 - 50
Dual Fan Blade to Fan Motor 6 - 50
Idler Pulley - Bolt - 5.7L/6.1L 54 40 -
Idler Pulley - Bolt - 2.7L/3.5L 28 - 250
Radiator to Support Bracket - Bolts 12 - 106
Thermostat Housing - Bolts - 2.7L/3.5L 12 - 105
Housing - Coolant Outlet - 2.7L 12 - 105
Housing - Coolant - 3.0L Diesel 12 - 105
Heater Supply Tube 3.4 - 30
Thermostat Housing - Bolts - 5.7L/6.1L 13 - 112
Upper Radiator Closure Panel - Bolts 10 - 90
Water Pump - Bolts - 2.7L/3.5L 12 - 105
Water Pump - Bolts - 5.7L/6.1L 28 20 -
Transmission Cooler Lines at Transmission 20 18 -
Transmission Cooler lines at thermal bypass valve 20 28 -