LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Thermostat >> Removal >> 5.7L/6.1L Engine

5.7L/6.1L Engine

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: THERMOSTAT - 5.7L/6.1L
GC0079909Courtesy of CHRYSLER LLC
1 - THERMOSTAT HOUSING
2 - THERMOSTAT
3 - BOLT
  1. Disconnect negative battery cable at battery.
  2. Drain cooling system. See Cooling - Standard Procedure .
  3. Remove radiator hose at thermostat housing (1).
    NOTE: Thermostat o-ring is part of thermostat (2) and is not serviced separately.
  4. Remove thermostat housing mounting bolts (3), thermostat housing (1) and thermostat (2).
scientia non olet · About LEMON Manuals