LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Thermostat >> Removal >> 3.0L Diesel

3.0L Diesel

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable.
  2. Remove engine cover. Refer to Engine - Removal .
  3. Drain engine coolant. See Cooling - Standard Procedure .
  4. Remove bracket for fuel line.
  5. Remove coolant hoses and thermostat housing.
  6. Remove thermostat housing.
  7. Clean all sealing surfaces.
scientia non olet · About LEMON Manuals