LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> SENSOR, Coolant Temperature >> Removal >> 3.0L Diesel

3.0L Diesel

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ETC REMOVE / INSTALL 3.0L
GC0079903Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Remove engine cover. Refer to Engine - Removal .
  3. Partially drain coolant system. See Cooling - Standard Procedure .
  4. Unplug coolant temperature sensor electrical connector (1).
  5. Remove coolant temperature sensor (2).
scientia non olet · About LEMON Manuals