LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> SENSOR, Coolant Temperature >> Removal >> 2.7L

SENSOR, Coolant Temperature: Removal: 2.7L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ENGINE COOLANT SENSOR - 2.7L
GC0079902Courtesy of CHRYSLER LLC
1 - ENGINE COOLANT SENSOR
2 - ELECTRICAL CONNECTOR
3 - COOLANT OUTLET TUBE
  1. Disconnect negative battery cable.
  2. Partially drain cooling system. See Cooling - Standard Procedure .
  3. Disconnect the electrical connector (2).
  4. Remove engine coolant sensor (1) from coolant outlet tube (3).
scientia non olet · About LEMON Manuals