SENSOR, Coolant Temperature: Installation: 3.5L
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER LLC
| 1 - CAMSHAFT POSITION SENSOR |
| 2 - ENGINE COOLANT TEMPERATURE SENSOR |
- Install engine coolant temperature sensor (2). Tighten sensor to 28 N.m (20 ft. lbs.).
- Attach electrical connector to sensor.
- Connect negative battery cable.