LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> PUMP, Water >> Removal >> 2.7L Engine

2.7L Engine

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Water Pump - 2.7L Engine
GC0095210Courtesy of CHRYSLER LLC
1 - WATER PUMP
2 - BOLTS
3 - BOLTS
  1. Drain cooling system. See Cooling - Standard Procedure .
  2. Remove radiator fan assembly. See Cooling/Engine/FAN, Cooling - Removal .
  3. Remove accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Removal .
  4. Remove the timing chain and all chain guides. Refer to Engine/Valve Timing/CHAIN and SPROCKETS, Timing - Removal .
  5. Remove bolts (2 and 3) attaching water pump (1) to block.
  6. Remove water pump (1) and gasket.
scientia non olet · About LEMON Manuals