LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> HOUSING, Coolant Outlet >> Installation >> 3.0L Diesel

3.0L Diesel

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the Water Outlet Housing on the cylinder block.
  2. Install mounting nuts and tighten to 11.8 N.m (105 in. lbs.).
  3. Fill cooling system. See Cooling - Standard Procedure .
  4. Operate engine until it reaches normal operating temperature. Check cooling system for correct fluid levels.
scientia non olet · About LEMON Manuals