LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> HEATER, Engine Block >> Removal >> 2.7L/3.5L Engine

2.7L/3.5L Engine

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Block Heater
GC0095206Courtesy of CHRYSLER LLC
1 - BLOCK HEATER
2 - ENGINE - RIGHT SIDE
  1. Raise vehicle on hoist.
  2. Detach power cord plug from block heater (1).
  3. Remove block heater attaching screw located below heater terminals.
  4. Remove block heater from cylinder block (2).
scientia non olet · About LEMON Manuals