5.7L/6.1L Engine
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER LLC
- Thoroughly clean cylinder block core hole and block heater seat.
- Insert block heater assembly (1) into the block.
- With block heater (1) fully seated, tighten bolt (2) to 2 N.m (17 in. lbs.) torque.
- Connect power cord (3) to block heater assembly (1).