LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> HEATER, Engine Block >> Description >> Engine Block Heater

Engine Block Heater

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Block Heater And Cylinder Block
GC0095205Courtesy of CHRYSLER LLC

The 2.7L and 3.5L engine block heater (1) is mounted in the cylinder block (2), near the right rear corner. The engine block heater (1) is a dry cylinder type design and is powered by 110 volt AC.

Fig 2: BLOCK HEATER 5.7L/6.1L
GC0091808Courtesy of CHRYSLER LLC
1 - BLOCK HEATER

The 5.7L and 6.1L engine block heater (1) is mounted in the cylinder block, near the left rear corner. The engine block heater (1) is a dry cylinder type design and is powered by 110 volt AC.