LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Accessory Drive >> TENSIONER, Belt >> Removal >> 5.7L/6.1L

TENSIONER, Belt: Removal: 5.7L/6.1L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: TENSIONER - 5.7L/6.1L ENGINE
GC0095199Courtesy of CHRYSLER LLC
1 - TENSIONER
2 - BOLT
  1. Remove accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Removal .
    WARNING: Because of high spring pressure, do not attempt to disassemble automatic tensioner. Unit is serviced as an assembly.
  2. Remove tensioner assembly bolt (2).
  3. Remove tensioner assembly (1) from mounting bracket.
scientia non olet · About LEMON Manuals